Mopeds and scooters are small fun vehicles to drive around the city. They use very little gas, so they are also economical. As is the case with any vehicle, however, a moped needs regular maintenance. When things break, they need to replace it. The headlight housing is one of those things, but, fortunately, it is an easy job and can be done for a minimal cost and in a short period.
The new LED replacement bulbs provide car owners with up to 160 percent brighter light to help them avoid danger and take action immediately. The LED sets are also with high power and easy to install. It is quite affordable for your budget as well.
Unscrew the compensation ring around the 9006 bulb led with the Phillips screwdriver. This result will release the bulb from the box, so be prepared to catch it with your hands-free.
Remove the 9006 led bulb and unplug it from the motorcycle with your hands. Set the old bulb aside and connect the replacement bulb to the harness.
Hold the 9006 led bulb in the mounting hole and place the compensation ring on the bulb — a screw-in place with the Phillips screwdriver. Please turn on the headlight switch to make sure it works properly.
Tips and warnings
- You should look for the right size bulbs for your headlight. Because LED bulbs have a huge amount of different colors. Some of them might not suitable for a headlight used.
- Additionally, you ought to make sure your LED headlight is permitted to use in your region. Because in some areas, LED headlights are not legal to use. It is necessary to realize the local road law before buying LED bulbs.